Configuration: Difference between revisions

Latest revision as of 22:30, 12 February 2026

Configuration of the epicEFI firmware is done via TunerStudio from EFIAnalytics. TunerStudio allows the user to edit the main controller configuration as well to change the various tables inside of the firmware.

Installing TunerStudio

Navigate to the TunerStudio download pageand download the latest TunerStudio for your platform. TunerStudio supports auto-update, so the latest available version will be installed once the auto-updater is ran at first startup.

Tuner Studio options

To access the individual TunerStudio options, use the following links:

@@ Line 4: / Line 4: @@
 Navigate to [https://www.tunerstudio.com/index.php/downloads the TunerStudio download page]and download the latest TunerStudio for your platform. TunerStudio supports auto-update, so the latest available version will be installed once the auto-updater is ran at first startup.
-== Setup ==
+== Tuner Studio options ==
+To access the individual TunerStudio options, use the following links:
-=== Vehicle configuration ===
+* <big>[[Setup]]</big>
-This is the basic engine configuration
+* [[Config:Fuel|<big>Fuel</big>]]
+* [[Config:Ignition|<big>Ignition</big>]]
-==== Number of cylinders ====
+* <big>[[Config:Cranking|Cranking]]</big>
-Number of cylinder the engine has.
+* <big>[[Config:Idle|Idle]]</big>
-==== Engine displacement(L) ====
-Engine displacement in litres
-==== Firing order ====
-This is the firing order of the engine. Please pay attention to enter the right firing order here, in regards to number of cylinders.
-==== Enabled ====
-Undocumented. ggurov -> What is this?
-=== Engine Metadata ===
-This is the metadata used by the epicEFI AI and the rusEFI MSQ viewer.
-==== Engine make and year ====
-This is the make and year of the engine/car