Template:Speeduino Warning: Difference between revisions
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
{{Warning|Please be advised that not all Speeduino boards are supported. The deciding factor is the on threshold of the MOSFETs and gate drives for ignition. For example, the STP62 on the Speeduino 0.4 and 0.3 boards are not supported, while MOSFETs on the UA4C are supported. Check the respective MOSFET datasheet and look for the "ON threshold" or "Gate threshold". It should be less than 3V}} | {{Warning|Please be advised that not all Speeduino boards are supported. The deciding factor is the on threshold of the MOSFETs and gate drives for ignition. For example, the STP62 on the Speeduino 0.4 and 0.3 boards are not supported, while MOSFETs on the UA4C are supported. Check the respective MOSFET datasheet and look for the "ON threshold" or "Gate threshold". It should be less than 3V.}} | ||
Latest revision as of 08:37, 29 January 2026
| Please be advised that not all Speeduino boards are supported. The deciding factor is the on threshold of the MOSFETs and gate drives for ignition. For example, the STP62 on the Speeduino 0.4 and 0.3 boards are not supported, while MOSFETs on the UA4C are supported. Check the respective MOSFET datasheet and look for the "ON threshold" or "Gate threshold". It should be less than 3V. |