Optical Trigger Wheels: Difference between revisions
Created page with "Used in many Nissan and Mitsubishi models, many variants but all fundamentally the same. Often best to replace with custom wheel. Treat as a Hall sensor in configurations. === Nissan 360 === 360 Slots on the outer ring, 4 or 6 slots on the inner ring with different sizes depending on model. === Custom Wheels === Parametric model for Fusion360 https://discord.com/channels/1356732771325968627/1430552762097336533/1430552883002081300 Can be used to generate a DXF to g..." |
No edit summary |
||
| Line 5: | Line 5: | ||
Treat as a Hall sensor in configurations. | Treat as a Hall sensor in configurations. | ||
== Nissan 360 == | |||
360 Slots on the outer ring, 4 or 6 slots on the inner ring with different sizes depending on model. | 360 Slots on the outer ring, 4 or 6 slots on the inner ring with different sizes depending on model. | ||
== Custom Wheels == | |||
Parametric model for Fusion360 | Parametric model for Fusion360 | ||
Latest revision as of 18:53, 15 February 2026
Used in many Nissan and Mitsubishi models, many variants but all fundamentally the same.
Often best to replace with custom wheel.
Treat as a Hall sensor in configurations.
Nissan 360
360 Slots on the outer ring, 4 or 6 slots on the inner ring with different sizes depending on model.
Custom Wheels
Parametric model for Fusion360
https://discord.com/channels/1356732771325968627/1430552762097336533/1430552883002081300
Can be used to generate a DXF to get produced by companies such as SendCutSend. Confirmed to work with Spring Steel (.015"). Slightly sanded to remove slag/burrs.
Other retailers offer their own versions.
Full sync can be achieved with a single wheel, with slots that cover both sensors. This allows simpler wiring as both inner and outer are not needed for common aftermarket ECUs. A single 36-1 signal at cam speed is enough for full sequential sync.