Quickstart: Difference between revisions
Created page with "This guide intends to provide a high-level overview of steps to get your project running and idling. There's an assumption that all the hardware vehicle improvements have been completed, ready to setup epicECU. == Prerequisite == First you need to install TunerStudio and then connect your epicEFI controller via USB. == Setup == {{Warning |1=After assigning hardware inputs/outputs, epicECU requires “burn” then a full powerof..." |
|||
| (4 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
This guide intends to provide a high-level overview of steps to get your | This guide intends to provide a high-level overview of steps to get your ECU connected and be ready for [[configuration]]. There's an assumption that all the hardware vehicle improvements have been completed. | ||
= Prerequisite = | |||
First you need to [[Configuration#Installing TunerStudio|install TunerStudio]] and then connect your epicEFI controller via USB. | First you need to [[Configuration#Installing TunerStudio|install TunerStudio]] and then connect your epicEFI controller via USB. | ||
TunerStudio has several versions that you can pick from, the gratis version being '''Lite!'''. While it can be used to tune and start the car without any problems, many essential troubleshooting tools such as the [[Tooth Logger]] are not available. | |||
It is strongly recommended to obtain a licensed version of TunerStudio. | |||
Next, you need to [[Firmware#Obtaining the firmware|download the firmware]] and [[Firmware#Updating the Firmware|flash your ECU]] if it did not arrive pre-loaded with the firmware. | |||
= Creating the project = | |||
[[Configuration#Installing TunerStudio|TunerStudio]] stores the ECU configuration and the specific controller settings in '''Projects'''. Each project is a directory in the user documents folder and stores all the project information in a single folder. | |||
Latest revision as of 14:06, 15 January 2026
This guide intends to provide a high-level overview of steps to get your ECU connected and be ready for configuration. There's an assumption that all the hardware vehicle improvements have been completed.
Prerequisite
First you need to install TunerStudio and then connect your epicEFI controller via USB.
TunerStudio has several versions that you can pick from, the gratis version being Lite!. While it can be used to tune and start the car without any problems, many essential troubleshooting tools such as the Tooth Logger are not available.
It is strongly recommended to obtain a licensed version of TunerStudio.
Next, you need to download the firmware and flash your ECU if it did not arrive pre-loaded with the firmware.
Creating the project
TunerStudio stores the ECU configuration and the specific controller settings in Projects. Each project is a directory in the user documents folder and stores all the project information in a single folder.