Jump to content

Coolant Pump: Difference between revisions

From epicEFI Wiki
← Older edit
ZeeKay (talk | contribs)
Administrators
84 edits
VisualWikitext
 
(4 intermediate revisions by the same user not shown)
Line 81: Line 81:


=== CWA200 ===
=== CWA200 ===
    Operation voltage: 8-16 volts
Good-sized pump for most applications main coolant
[[File:Pierburg CWA200.png|thumb|CWA200 Pump]]
*     Operation voltage: 8-16 volts
*     Weight: approx. 2.15 kg
*     Current consumption: 15A (16.5A max.) / (approx. 0.2mA in standby mode)
*     Nominal diff. pressure: 0.45 bar *
*     Flow rate: ca. 116 l/min @ 0.45bar / 166 l/min @ 0.30bar
*     Speed: approx. 4500 rpm
*     Temperature range: -40°C – 128°C (water) / -40°C – 140°C (ambient)
*     Protection: IP67


    Weight: approx. 2.15 kg
==== Part numbers ====


    Current consumption: 15A (16.5A max.) / (approx. 0.2mA in standby mode)
*     Pierburg: 7.02851.20.0 / 7.02851.20.8 / 7.00294.17.0
*     BMW: 11517586925 / 11517586924 / 11517563183 / 11517546994 / 11517545201 / 11517521584


    Nominal diff. pressure: 0.45 bar *
==== Connector ====


    Flow rate: ca. 116 l/min @ 0.45bar / 166 l/min @ 0.30bar
* '''Type''': 4-way [[Kostal SLK]]  (male on the pump side; mating female pigtail/harness connector).
* '''Housing Part Number''': Kostal '''09441491''' (also referenced as 09 4414 91 or similar variants; coding A).
* '''Terminals''': Kostal SLK 2.8 ELA (flat blade, 2.8 mm size).
** Part Number: '''22124499560''' (quantity: 4).
* '''Seals''': Kostal SLK 2.8 ELA seals.
** Part Number: '''10800444522''' (quantity: 4).


    Speed: approx. 4500 rpm
==== Wiring ====
[[File:Pierburg CWA200 Pinout.png|thumb|Pierburg CWA200 Pinout]]


    Temperature range: -40°C – 128°C (water) / -40°C – 140°C (ambient)
# Power (12v)
 
# Signal (PWM)
    Protection: IP67
# Signal (GND)
 
# Power (GNDCWA200 Pump
==== Part numbers: ====
    Pierburg: 7.02851.20.0 / 7.02851.20.8 / 7.00294.17.0
 
    BMW: 11517586925 / 11517586924 / 11517563183 / 11517546994 / 11517545201 / 11517521584


==== PWM Input ====
==== PWM Input ====
Line 145: Line 157:
[[File:Pierburg CWA200 duty cycle vs speed.png|none|thumb|500x500px|Fig. 12: Duty cycle versus speedGraph showing pump speed (%) vs. PWM duty cycle (%), with distinct modes: flat at low DC (Mode 1/2), linear from ~14% to 85% (Mode 3), and flat at high DC (Mode 4).]]
[[File:Pierburg CWA200 duty cycle vs speed.png|none|thumb|500x500px|Fig. 12: Duty cycle versus speedGraph showing pump speed (%) vs. PWM duty cycle (%), with distinct modes: flat at low DC (Mode 1/2), linear from ~14% to 85% (Mode 3), and flat at high DC (Mode 4).]]


===== '''PWM modes''' =====
===== PWM modes =====
{| class="wikitable"
{| class="wikitable"
!Mode
!Mode

Latest revision as of 15:50, 16 February 2026

Coolant pumps, used for main coolant or Water/Air intercoolers

Bosch

General use

0392020034

Used on some GMs, small in size, can be used for W/A IC.

0392020034
Ratings

10w

Flow ?

Fittings:

Inlet: 5/8"? (not sure if od or id) barb

Outlet: 5/8"? barb

Mounting ?

Drawings
Wiring
Connector
Interchange numbers

0392020034, 10438993

0392022002 (Cobra Pump)

Similar to the 200034, but larger. Used on Supercharged Fords, etc. Suitable for higher flow intercoolers.

Drawings
Wiring
Connector

2 pin Junior Power Timer

Ratings

50w

Flow ?

Fittings - Barb size ?

Mounting: ?

Interchange numbers

0392022002, 15076931, PEB500010

0392023004

Mercedes-Benz

Drawings
Wiring
Connector

2 pin 1J0973722(?)

Ratings
  • 13W
  • Operating Pressure (PSI) 1.45
  • 4 GPM (15L/Minute)
  • 3/4″Lip Creates a Secure Connection when used on 5/8″ Hose
  • IP69K Protection Type
  • Recommended Mounting Clamp 2.25″
Interchange numbers

0392023004, 1718350064, 1978350064, 2048350364, 2118350264, 6398350064, 16-00102

Pierburg

CWA Flow Rates

Common on VW/BWMs, various sizes to suit small intercoolers to full engine coolant. PWM controlled


https://tecomotive.com/store/en/water-pumps/?o=1&p=1

CWA200

Good-sized pump for most applications main coolant

CWA200 Pump
  •     Operation voltage: 8-16 volts
  •     Weight: approx. 2.15 kg
  •     Current consumption: 15A (16.5A max.) / (approx. 0.2mA in standby mode)
  •     Nominal diff. pressure: 0.45 bar *
  •     Flow rate: ca. 116 l/min @ 0.45bar / 166 l/min @ 0.30bar
  •     Speed: approx. 4500 rpm
  •     Temperature range: -40°C – 128°C (water) / -40°C – 140°C (ambient)
  •     Protection: IP67

Part numbers

  •     Pierburg: 7.02851.20.0 / 7.02851.20.8 / 7.00294.17.0
  •     BMW: 11517586925 / 11517586924 / 11517563183 / 11517546994 / 11517545201 / 11517521584

Connector

  • Type: 4-way Kostal SLK (male on the pump side; mating female pigtail/harness connector).
  • Housing Part Number: Kostal 09441491 (also referenced as 09 4414 91 or similar variants; coding A).
  • Terminals: Kostal SLK 2.8 ELA (flat blade, 2.8 mm size).
    • Part Number: 22124499560 (quantity: 4).
  • Seals: Kostal SLK 2.8 ELA seals.
    • Part Number: 10800444522 (quantity: 4).

Wiring

Pierburg CWA200 Pinout
  1. Power (12v)
  2. Signal (PWM)
  3. Signal (GND)
  4. Power (GNDCWA200 Pump

PWM Input

The PWM input is a unidirectional signal input which can be used to control the pump speed.

Input frequency

The frequency of the PWM signal can be in the following range:

  • Range: 50 to 1000 Hz

Note: To make sure that the pump awakes under PWM controlling, an uninterrupted high pulse of at least 3 ms is necessary at the PWM input. For example: this is automatically achieved at a PWM frequency of 150 Hz and a duty cycle of 50% or above.

Duty cycle

The percentage duty cycle (DC) is represented by the ratio of Thigh to Tperiode:

DC[%] = Thigh / (Tlow+Thigh)

Fig 10.

Fig. 10: Definition of the duty cycleTypical square wave PWM signal showing VHi, VLo, Thigh, Tlow, and period.
Input level PWM
Signal description Max Min
VHi UB + 3 V*

max. 28 V (60 s)*

0.6 UB
VLo 0.4 UB GND - 3 V*

UB = Power supply * Absolute maximum ratings!

Schematic of PWM interface

Fig 11.

Fig. 11: Schematic of PWM-InterfaceCircuit diagram showing PWM input conditioning with resistors, capacitors, diode, and connection to microcontroller (µP).
Ratio between duty cycle and speed

The ratio between duty cycle and speed is shown in the following diagram. Fig 12.

Fig. 12: Duty cycle versus speedGraph showing pump speed (%) vs. PWM duty cycle (%), with distinct modes: flat at low DC (Mode 1/2), linear from ~14% to 85% (Mode 3), and flat at high DC (Mode 4).
PWM modes
Mode Duty cycle (DC) Speed Description
1 0% – 6% Max or 0 MAX if BSD = high; 0 if BSD = 0
2 8% – 12% 0 Stop and error reset
3 14% – 85% Min – Max Controlled operation. The characteristic is linear
4 85% – 100% Max Full speed

The tolerance of the pump's interpretation of the PWM signal can vary by +/- 1% of the duty cycle.

Retrieved from "https://content.epicefi.com/wiki/index.php?title=Coolant_Pump&oldid=380"