Quickstart - Revision history

Ogalic: /* Prerequisite */

2026-01-15T14:06:53Z

Prerequisite

← Older revision		Revision as of 14:06, 15 January 2026
Line 8:		Line 8:
	It is strongly recommended to obtain a licensed version of TunerStudio.		It is strongly recommended to obtain a licensed version of TunerStudio.

	Next, you need to [[Firmware#Obtaining the firmware\|download the firmware]] and [[Firmware#Updating the ~~firmware~~\|~~Flash~~ your ~~controller~~]] if it did not arrive pre-loaded with the firmware.		Next, you need to [[Firmware#Obtaining the firmware\|download the firmware]] and [[Firmware#Updating the Firmware\|flash your ECU]] if it did not arrive pre-loaded with the firmware.

	= Creating the project =		= Creating the project =
	[[Configuration#Installing TunerStudio\|TunerStudio]] stores the ECU configuration and the specific controller settings in '''Projects'''. Each project is a directory in the user documents folder and stores all the project information in a single folder.		[[Configuration#Installing TunerStudio\|TunerStudio]] stores the ECU configuration and the specific controller settings in '''Projects'''. Each project is a directory in the user documents folder and stores all the project information in a single folder.

Ogalic: /* Prerequisite */

2026-01-15T14:06:23Z

Prerequisite

← Older revision		Revision as of 14:06, 15 January 2026
Line 8:		Line 8:
	It is strongly recommended to obtain a licensed version of TunerStudio.		It is strongly recommended to obtain a licensed version of TunerStudio.

	Next, you need to [[Firmware#Obtaining the firmware\|download the firmware]] and [[Firmware#Updating the firmware\|~~flash~~ your controller]] if it did not arrive pre-loaded with the firmware.		Next, you need to [[Firmware#Obtaining the firmware\|download the firmware]] and [[Firmware#Updating the firmware\|Flash your controller]] if it did not arrive pre-loaded with the firmware.

	= Creating the project =		= Creating the project =
	[[Configuration#Installing TunerStudio\|TunerStudio]] stores the ECU configuration and the specific controller settings in '''Projects'''. Each project is a directory in the user documents folder and stores all the project information in a single folder.		[[Configuration#Installing TunerStudio\|TunerStudio]] stores the ECU configuration and the specific controller settings in '''Projects'''. Each project is a directory in the user documents folder and stores all the project information in a single folder.

Ogalic: /* Prerequisite */

2026-01-15T10:59:30Z

Prerequisite

← Older revision		Revision as of 10:59, 15 January 2026
Line 8:		Line 8:
	It is strongly recommended to obtain a licensed version of TunerStudio.		It is strongly recommended to obtain a licensed version of TunerStudio.

	Next, you need to [[download the firmware]] and [[flash your controller]] if it did not arrive pre-loaded with the firmware.		Next, you need to [[Firmware#Obtaining the firmware\|download the firmware]] and [[Firmware#Updating the firmware\|flash your controller]] if it did not arrive pre-loaded with the firmware.

	= Creating the project =		= Creating the project =
	[[Configuration#Installing TunerStudio\|TunerStudio]] stores the ECU configuration and the specific controller settings in '''Projects'''. Each project is a directory in the user documents folder and stores all the project information in a single folder.		[[Configuration#Installing TunerStudio\|TunerStudio]] stores the ECU configuration and the specific controller settings in '''Projects'''. Each project is a directory in the user documents folder and stores all the project information in a single folder.

Ogalic at 10:58, 15 January 2026

2026-01-15T10:58:57Z

← Older revision		Revision as of 10:58, 15 January 2026
Line 1:		Line 1:
	This guide intends to provide a high-level overview of steps to get your ~~project running~~ and ~~idling~~. There's an assumption that all the hardware vehicle improvements have been completed~~, ready to setup epicECU~~.		This guide intends to provide a high-level overview of steps to get your ECU connected and be ready for [[configuration]]. There's an assumption that all the hardware vehicle improvements have been completed.

	== Prerequisite ==		= Prerequisite =
	First you need to [[Configuration#Installing TunerStudio\|install TunerStudio]] and then connect your epicEFI controller via USB.		First you need to [[Configuration#Installing TunerStudio\|install TunerStudio]] and then connect your epicEFI controller via USB.

	~~== Quick~~ start ==		TunerStudio has several versions that you can pick from, the gratis version being '''Lite!'''. While it can be used to tune and start the car without any problems, many essential troubleshooting tools such as the [[Tooth Logger]] are not available.

	~~{{Warning \|1=After assigning hardware inputs/outputs, epicECU requires “burn” then~~ a ~~full poweroff (ignition +~~		It is strongly recommended to obtain a licensed version of TunerStudio.
	~~usb removal) to apply changes properly~~.}}

	=== [[~~Setup~~#~~Vehicle Information~~\|~~Setup → Vehicle Information~~]] ~~===~~		Next, you need to [[download the firmware]] and [[flash your controller]] if it did not arrive pre-loaded with the firmware.

			= Creating the project =
			[[Configuration#Installing TunerStudio\|TunerStudio]] stores the ECU configuration and the specific controller settings in '''Projects'''. Each project is a directory in the user documents folder and stores all the project information in a single folder.

Ogalic at 14:37, 10 January 2026

2026-01-10T14:37:54Z

← Older revision		Revision as of 14:37, 10 January 2026
Line 4:		Line 4:
	First you need to [[Configuration#Installing TunerStudio\|install TunerStudio]] and then connect your epicEFI controller via USB.		First you need to [[Configuration#Installing TunerStudio\|install TunerStudio]] and then connect your epicEFI controller via USB.

	== ~~Setup~~ ==		== Quick start ==

	{{Warning \|1=After assigning hardware inputs/outputs, epicECU requires “burn” then a full poweroff (ignition +		{{Warning \|1=After assigning hardware inputs/outputs, epicECU requires “burn” then a full poweroff (ignition +
	usb removal) to apply changes properly.}}		usb removal) to apply changes properly.}}

			=== [[Setup#Vehicle Information\|Setup → Vehicle Information]] ===

Ogalic: Created page with "This guide intends to provide a high-level overview of steps to get your project running and idling. There's an assumption that all the hardware vehicle improvements have been completed, ready to setup epicECU. == Prerequisite == First you need to install TunerStudio and then connect your epicEFI controller via USB. == Setup == {{Warning |1=After assigning hardware inputs/outputs, epicECU requires “burn” then a full powerof..."

2026-01-10T14:34:36Z

Created page with "This guide intends to provide a high-level overview of steps to get your project running and idling. There's an assumption that all the hardware vehicle improvements have been completed, ready to setup epicECU. == Prerequisite == First you need to install TunerStudio and then connect your epicEFI controller via USB. == Setup == {{Warning |1=After assigning hardware inputs/outputs, epicECU requires “burn” then a full powerof..."

New page

This guide intends to provide a high-level overview of steps to get your project running and idling. There's an assumption that all the hardware vehicle improvements have been completed, ready to setup epicECU.

== Prerequisite ==
First you need to [[Configuration#Installing TunerStudio|install TunerStudio]] and then connect your epicEFI controller via USB.

== Setup ==

{{Warning |1=After assigning hardware inputs/outputs, epicECU requires “burn” then a full poweroff (ignition +
usb removal) to apply changes properly.}}